Guidelines for Using FIBC Bags for Transporting Wet Materials and Products-Rishi FIBC Solutons Pvt Ltd

Guidelines for Using FIBC Bags for Transporting Wet Materials and Products

The FIBC bags have become very popular in the transportation industry owing to a number of advantages that these bags have on offer. Many times, it happens that there are some wet materials and products which are to be transported. In this situation as well, the FIBC bags serve great purposes. But at this point of time, to make the best use of the FIBC bags for the transportation of wet materials and products, here are a few important guidelines to follow.

Materials or Products are Very Wet

At the time when the materials or products to be transported are very wet, the moisture or the water can seep through seams or the fabric of the FIBC bags. This simply cannot be accepted at any cost. Now, to effectively deal with this seepage issue, the liners serve great purposes. The liners are highly effective in keeping the moisture in the bag and necessarily prevent any kinds of materials from getting in or coming out of the bag.

Wet Products are Heavy and Cause Trouble

It is quite a common fact that weight products are heavier due to the presence of moisture or water. Now, if the moisture is present in larger amount it adds a significant amount of weight to the bag in the same volume. This, in turn, can cause a lot of trouble by interfering with the safe working load or SWL of the FIBC bags. Thus, it becomes important to consider FIBC bags that have higher safe working load which are made out of thicker fabric and mostly have heavy duty stitching to have a greater SWL.

Materials or Products are Too Moist at the Time of Storage

There are certain products which are too moist at the time of storage such as industrial hemp thereby readily increasing the chances of formation of moulds. This might be a cause of serious headache for the users because of the fact that the moulds can cause the product inside the FIBC bags to rot degrade in quality which in turn can result in financial loss as well.

Spout Bottom Gets Clogged at the Time of Discharge

The spout bottom FIBC bags have a tendency to get clogged at the time of discharging with wet products or materials in the bags. This is quite an important thing to keep in mind. This is undoubtedly a major issue faced by the users since it is not only inconvenient to attempt for clearing a clogged spout but also can be sometimes dangerous as well. In this situation, it would certainly be a very good idea to consider a full bottom discharge FIBC bags or diaper bottom bags. These types of bags can be used as a very good alternative where the issue of clogging is resolved.

Following all of the guidelines so mentioned above would be of a great help at the time of using FIBC bags for the transportation of wet materials or products.

Why Choose Rishi FIBC?

Now, at the time of using FIBC bags, it is of immense importance to select a trusted FIBC bag manufacturer so as to make sure that only the premium quality bags are manufactured. Rishi FIBC is a well known name in the field of FIBC bags and hence can be chosen without any kind of hesitation. With several years of experience as a manufacturer of FIBC bags, the users can be assured of getting the premium quality FIBC bags that too at the best prices.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *